|
ALCOHOL color test in saliva
Certificates: it does not
need CE
self test certificate as by IVDD directive
98/78/EC
being listed as forensic test
A cost effective and simple
strip with color pad for visual test on
saliva, individually pouched in a luxury
aluminium pouch ready to be sold to public.
|
|
|
After moistened with saliva, the pad gives
in minutes different colors according to the
concentration of alcohol in saliva,
corresponding to the concentration of
alcohol in blood stream.
Easy to use for a quick check of the alcohol
content in any needed circumstance, from the
control after eating or at the exit of a
disco or a bar before driving, up to a
control by parents on children or in centres
for rehabilitation, in forensic market in
case of accidents etc.
The pouch can be customized according to the
country upon customer design and with
distributor logo and the levels ( color
scale ) can be adapted to meet any local
regulations in the range from 0.2 to 3.00 g/
l.
This test is supplied in single pouch inside
a presentation folder or a display box with
various graphics and different color scales
according to each country regulations. It is
a forensic test, that means it s listed as
non diagnostic test inside the EU IVDD
directive and does not need the CE self test
certification for being sold to public. The
importance of this test when sold through
pharmacies is that the message can be
stronger and more preventive. |
|
BREATH ALCOHOL DETECTOR
Certificates: it does not
need CE
self test certificate as by IVDD directive
98/78/EC
being listed as forensic test
The Breath Alcohol Detector
is a disposable breath alcohol indicator
designed for one- time use.
It contains indicator
chemistry that will undergo a color change
in the presence of alcohol contained in the
breath of the subject.
This product provides a
reliable indication of alcohol present in
the blood, based on the exhaled breath of
the test subject when the instruction for
use are carefully followed. |
|
The test is done by squeezing middle of
the outer plastic tube between thumb and forefinger to
break the inner glass ampoule containing yellow
crystals. Then blowing very hardly for 12 seconds inside
the tube, shaking the tester to distribute crystals and
reading color after 2 min.
Color is compared with a color chart
having 3 main colors:
Strong yellow : 0%
Light yellow: 0.04% : caution, borderline
value
Light green; 0.08% : high alcohol level, do not drive
|
DUAL DISPLAY ALCOHOL BREATH TESTER
Certificates: the tester is
not a medical device so it does not need any
specific CE certification for this purpose.
It is available the declaration of
conformity that the instrument complies with
requirements related to electromagnetic
compatibility based on EN 55022:1998,
EN55024:1998
New, extremely
convenient, elegant, compact, this digital
alcohol tester is one of most appealing
instruments now available for sales to both
professionals and privates.
The instrument uses an
advanced semiconductor oxide alcohol sensor
measuring alcohol in a range from 0 to 0.95
mg/L BRAC with an accuracy of 0.05mg / L
BRAC
The use of the tester is very simple and the
operator is guided by the instrument itself
in the procedure.
|
|
 |
When pushing start button the sensor cleans
and warms up for approx 10 seconds.
Then “BLOW”
symbol is displayed and tester beeps to indicate
to be ready and a count-down from 9 to 0 starts.
During the count-down the operator has to
blow into the breath inhaler for 3-5 seconds and
then reading displayed result.
The “CAUTION”
symbol appears if alcohol concentration is
between 0.1 and 0.25 mg/L BRAC ( 0.2 – 0.5
g/L)
The “DANGER”
symbol appears and instrument
beeps an alert if
alcohol concentration is over or equal to 0.25
mg/L BRAC ( 0.5
g/L) |
The
tester self switches-off if not used or read and in
order to reset it cannot be reused before 3 minutes to
grant reliable results.
A clock with LCD display is incorporated into the tester
with alarm
and temperature indicator.
|
BREATH ALCOHOL TESTER WITH FLASHLIGHT
Certificates: the tester is
not a medical device so it does not need any
specific CE certification for this purpose.
New, extremely cost
effective, reliable, this alcohol tester is
ideal for testing indicative alcohol range
in the blood
The instrument uses an
advanced semiconductor oxide alcohol sensor
measuring alcohol in a range from 0 to 0.1%
BAC ( 0 to 0.50 mg/L BRAC ) with an
accuracy of 0.01% BAC ( 0.05mg/L BRAC
)
The use of the tester is very simple. When
pushing start button the sensor cleans and
warms up for approx 10 seconds. Then the
operator has to blow into the breath inhaler
for 3-5 seconds and then reading the light
color.
|
|
|
 |
The green LED
keeps lighting if alcohol concentration is under 0.02% BAC ( 0.1mg/L BRAC or 0.2
gr/L )
The yellow LED
lights if alcohol concentration is between
0.02% and 0.05% BAC ( from 0.1mg/L to 0.25 mg/L
BRAC or 0.5gr/L )
The yellow and red
LEDS both light ( danger ) when
concentration is over 0.05% BAC ( 0.25 mg/L BRAC
or 0.5 gr/L)
The tester self switches-off
if not used or read.
A Torch and a Key Chain is
incorporated into the tester. |
|
